 |
PE
ZCJK
| Quantity: | |
|---|---|
| ZCJK PE Jaw Crusher |
| Production capacity: 1-1000t/h Feeding size: ≤1200mm Motor power: 5.5-280KW Applicable materials: limestone, quartzite, river pebble, granite, basalt, diabase, gold, copper, iron, etc. |
| Specification |
| No. | Model | Feeding size | Discharge size | Processing capacity | Motor Power | Overall Dimention |
| 1 | PE 150 X 250 | ≤ 130 mm | 15-45 mm | 1-4 t/h | 5.5 kw | 896 x 745 x 935 mm |
| 2 | PE 250 X 300 | ≤ 150 mm | 15-55 mm | 3-6 t/h | 7.5 kw | 1050 x 987 x 1000 mm |
| 3 | PE 250 X 400 | ≤ 210 mm | 25-60 mm | 5-20 t/h | 15 kw | 1215 x 1520 x 1030 mm |
| 4 | PE 400 X 600 | ≤ 350 mm | 40-90 mm | 15-60 t/h | 30 kw | 1650 x 1588 x 1050 mm |
| 5 | PE 500 X 750 | ≤ 425 mm | 50-10 mm | 40-110 t/h | 45 kw | 1956 x 1918 x 1920 mm |
| Product Introduction |
| PE Jaw crushers are coarse and medium crush and wideh used in the material which compressive strength below 320 MPa. Have the features of large crushing ratio , product size uniformity , solid structure , stable work , easy maintenance, low operating costs. The crusher has been widely in mining, metakkurgy, chemical, building materials, roads, railways, water conservation and other industries. |
| Performance characteristics |
| 1 | Large and reliable adjusting range of discharge outlet meets various requirements |
| 2 | Safe and reliable lubrication system, easily changed spare parts and easy matainance |
| 3 | Lage crushing ratio and Uniform discharge particle size |
| 4 | Simple structure and low operation cost |
| 5 | Low noise and little dust pollution |
| Working principle |
| The motor drives the belt abd the belt wheel to move the movable jaw up and down through an eccentric shaft. When the movable jaw rises, the Angle between the elbow plate and the movable jaw becomes larger, thus driving the movable jaw plate towards the fixed jaw plate. At the same time, the materials is crushed or split to achieve the purpose of crushing. When the jaw goes down, the angle between the elbow plate and the jaw decreases. Under the action of the bar and spring, the jaw plate leaves the fixed jaw plate. At this time the crushed material is discharged from mouth of crushing chamber. With the continuous rotation of the motor, the crushing motor jaw makes periodic motion to crush and discharge materials, realizing mass production. |
| Customer case |
| ZCJK PE Jaw Crusher |
| Production capacity: 1-1000t/h Feeding size: ≤1200mm Motor power: 5.5-280KW Applicable materials: limestone, quartzite, river pebble, granite, basalt, diabase, gold, copper, iron, etc. |
| Specification |
| No. | Model | Feeding size | Discharge size | Processing capacity | Motor Power | Overall Dimention |
| 1 | PE 150 X 250 | ≤ 130 mm | 15-45 mm | 1-4 t/h | 5.5 kw | 896 x 745 x 935 mm |
| 2 | PE 250 X 300 | ≤ 150 mm | 15-55 mm | 3-6 t/h | 7.5 kw | 1050 x 987 x 1000 mm |
| 3 | PE 250 X 400 | ≤ 210 mm | 25-60 mm | 5-20 t/h | 15 kw | 1215 x 1520 x 1030 mm |
| 4 | PE 400 X 600 | ≤ 350 mm | 40-90 mm | 15-60 t/h | 30 kw | 1650 x 1588 x 1050 mm |
| 5 | PE 500 X 750 | ≤ 425 mm | 50-10 mm | 40-110 t/h | 45 kw | 1956 x 1918 x 1920 mm |
| Product Introduction |
| PE Jaw crushers are coarse and medium crush and wideh used in the material which compressive strength below 320 MPa. Have the features of large crushing ratio , product size uniformity , solid structure , stable work , easy maintenance, low operating costs. The crusher has been widely in mining, metakkurgy, chemical, building materials, roads, railways, water conservation and other industries. |
| Performance characteristics |
| 1 | Large and reliable adjusting range of discharge outlet meets various requirements |
| 2 | Safe and reliable lubrication system, easily changed spare parts and easy matainance |
| 3 | Lage crushing ratio and Uniform discharge particle size |
| 4 | Simple structure and low operation cost |
| 5 | Low noise and little dust pollution |
| Working principle |
| The motor drives the belt abd the belt wheel to move the movable jaw up and down through an eccentric shaft. When the movable jaw rises, the Angle between the elbow plate and the movable jaw becomes larger, thus driving the movable jaw plate towards the fixed jaw plate. At the same time, the materials is crushed or split to achieve the purpose of crushing. When the jaw goes down, the angle between the elbow plate and the jaw decreases. Under the action of the bar and spring, the jaw plate leaves the fixed jaw plate. At this time the crushed material is discharged from mouth of crushing chamber. With the continuous rotation of the motor, the crushing motor jaw makes periodic motion to crush and discharge materials, realizing mass production. |
| Customer case |
